Skip to main content
CFD Analysis to Study the Wind and Heat-Island Effect due to Outdoor A.C. Units in a High Rise Building
To study the airflow around the project building & other buildings due to the effect of wind and effect of heat generated by outdoor air conditioners installed in high rise project building on other surrounding buildings in worst case scenario. For wind flow analysis the predominant wind direction of SW with average wind velocities of 3 m/sec in Mumbai is considered based on the ISHRAE weather data. Hence, in worst case scenario all 30 floors with 20 outdoor AC units in each floor were considered for total heat dissipation from the project building. The worst case conditions were simulated for 21st March at 22:00 which is assumed to be a condition when all the ACs were working. At that moment as per ISHRAE weather data the ambient temperature in Mumbai is 26.9 C, same was considered in the CFD analysis.



Modelling and Analysis: Based on the provided CAD drawings details of the “Kahprideo project building & surrounding buildings”, the 3D CFD model was prepared. The area of interest for the project building & its surrounding building is 305m width, 340m length & 125.5m height. After preparing the 3 D geometry, the high quality mesh with different hexagonal & tetrahedral mesh was generated with total mesh cells of 8.8 million cells were obtained. The meshed geometry was used for solving the flow & energy equations in “project building & surrounding buildings” with applying the suitable boundary conditions in worst case conditions to see the effect of wind flow around buildings and heat dissipated by outdoor air conditioners on other buildings.

More information: http://www.mechartes.com/blog/2017/9/7/cfd-analysis-to-study-the-wind-and-heat-island-effect-due-to-outdoor-ac-units-in-an-high-rise-building

Location: Uttar Pradesh 201301, India

Comments

Post a Comment

Popular posts from this blog

CFD Analysis Services and CFD Modelling Services

Mechartes focus on providing top quality CFD Analysis & CFD Modelling Services and believe provide to our clients with correct results which too continually delivered on time. Mechartes experienced technical member is well qualified and wide intimate with and use the world’s most advanced CFD software package. Mechartes produced to the foremost advanced and complex CFD simulation techniques to produce real-world engineering solutions that square measure price effective, sensible and commercially viable. We offer the following CFD Analysis services: * POWER, OIL & GAS * BUILDING & CONSTRUCTION * AUTOMOBILE & HIGH TECH * Product Selection Software * IoT based hardware & software development * Engineering Design Tools * Dynamic Mesh Analysis Simulation * Combustion Analysis & Modeling * Heat Transfer Analysis * HVAC Analysis and Design * Hydrodynamic Analysis * Turbomachinery Analysis Advantages of CFD Analysis * Ability to foresee im...
Post a Comment
Read more

Pulsation Analysis For High Pressure Petroleum Pipelines

Objective: Piping systems are a central part of numerous engineering installations. A number of sources such as pumps generate vibrations which can propagate along the pipes and excite other structures. These vibrations can cause two main problems, namely mechanical fatigue and acoustical noises. Further, interaction of the dynamic flow generated by the pump plungers with acoustical resonances in piping systems can result in high pressure pulsation levels pump and piping, cavitation, excessive vibrations and failures. Moreover, higher frequency fluid borne noise can be generated from flow perturbations associated with elbows, valves or cross section changes in the pipe. This design approach in conjunction with pulsation simulation is required to couple technical analysis of piping system to ensure that the piping will have adequate supports and clamps to maintain mechanical natural frequency of major acoustical energy. Modeling and Analysis: The first design approach involved pu...
Post a Comment
Read more